Filter
Top Products
- 4 -
Operating positions
Important: Only operate the appliance when
accessories are attached and in the operating
positions shown in this table. NEVER operate the
appliance without ingredients.
Working with kneading hooks,
beaters and whisks
Note: The appliance may only be used when
the drive openings not being utilised are
covered with drive protection lids.
Position Accessories
1
2
3
4
Positioning of the mixing bowl
Utilisation of kneading hooks,
beaters and whisks
5
Insertion of large amounts to be
processed
To prepare the appliance for work with kneading
hooks
q
, beaters
w
and whisk
e
, proceed as
follows:
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Insert the mixing bowl
y
. The base of the mixing
bowl
y
must engage in the recesses
k
on the
appliance.
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 1 (see chapter
„Operating positions“) (Fig. 1).
• Place and hold turn-switch
g
in position P, until
the drive motor
j
remains stationary in the park
position (Fig. 2). Should the drive motor not
move it is already at the park position.
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 4 (see chapter
„Operating positions“) (Fig. 1).
• Depending on the task to be performed, insert
the kneading hooks
q
, beaters
e
or whisks
w
so
that they firmly engage in the drive
j
motor.
Note: The kneading hooks
q
are fitted with a
pastry deflector. Turn the pastry deflector until the
kneading hooks
q
can engage (Fig. 3).
• Place the ingredients to be processed into the
mixing bowl
y
.
Note: Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities“.
• Press the unlocking button
f
and bring the swivel
arm
h
into operating position 1 (see chapter
„Operating positions“) (Fig. 1).
• Place the lid onto the mixing bowl
y
.
• Set the rotary switch
g
to the desired level.
IB_KH701_35701_LB6 30.06.2009 14:44 Uhr Seite 4