Filter
Top Products
- 3 -
To avoid the risk of accidents and
injuries:
• Never put your hand into the openings of the ap-
pliance. Do not insert any objects of any kind
into the openings – except for the appropriate
stodger and the foodstuff to be processed. If you
do, there will be a serious risk of accidents!
• Unplug the appliance from the power source be-
fore attaching or removing accessories.
• Do not leave the appliance unsupervised when it
is ready for use. To avoid it being switched on
accidentally, always unplug the appliance after
use or during breaks.
• Use only original accessories for this appliance.
Other accessories may not meet the safety
requirements.
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-lo-
gical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never operate the appliance in a no-load condi-
tion. This could irreparably damage the
appliance.
5. Assembly / Disassembly
IMPORTANT: All accessories are coated with
a thin film of oil to protect them from corrosion.
Therefore carefully clean all of the parts before
using the appliance for the first time, as com-
prehensively described on chapter "8 Clea-
ning". After subsequent usage, always apply a
light coating of cooking oil to the metallic
components.
a) Assembling the meat grinder
Unfold the fold-out side. There you will find the
step-by-step illustrations for assembling the appliance.
• Place the transport screw
y
into the mincer
casing
t
.
• Place the spring
u
onto the transport screw
y
.
• Then place on the cross blade
i
so that the
sharp side points away from the spring
u
.
Caution:
The cross blade
i
is very sharp! Risk of injury!
Important!:
The appliance will be damaged if the cross blade
i
is inserted the other way around!
• Select the desired cutting disc. The cutting discs
that are not required can be stored in the small
compartment on the appliance (Fig.
Ả
).
To open it, press on the symbol on the cover.
The cover can now be opened. Insert the two
unrequired cutting discs.
• Insert the selected cutting disc
o
into the meat
grinder casing
t
, so that the indentations on the
cutting disc
o
lie on the fixing points in the meat
grinder casing
t
.
• When everything has been correctly assembled,
screw the ring clamp
a
on until it is handtight.
IB_62025_SFW250A1_LB6 05.11.2010 14:00 Uhr Seite 3