Filter
Top Products
Overview
3
Table 1: Using the RK-1UTB/T
Mounting Kramer products
1
For example:
on the RK-1UTB
• One VP-100A unit
• Two 104B units
• One 104B unit
• One PS-1DVI unit
• One PT-1PS unit
• Four PS-1DVI units
The RK-1UTB/T does not have to be entirely full with mounted units. You
can use the optional blank panels defined in
Table 2 to fill the empty spaces.
Table 2: RK-1UTB/T Blank Panels – Part Numbers
Blank Panel Description
Part Number
PNL-BLANK/1/2U-19" 60-900013
PNL-BLANK/1/4U-19"
2
60-900014
PNL-BLANK/1/8U-19" 60-900015
3.1 Recommendations for Best Performance
We recommend that you:
• Have a Philips screwdriver available
• Disconnect the mains voltage and all cables connected to each machine that
is being mounted in the rack adapter before proceeding with the installation
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
• Avoid interference from neighboring electrical appliances and position
your rack adapter on the rack away from moisture, excessive sunlight and
dust
1 Each product is measured in inches
2 Supplied with the unit