Filter
Top Products
7
ENG
TOASTING BREAD:
• Insert the slices of bread in the toaster slots - (fig. 2).
• Select the desired browning level, from 1 to 9, by pressing the + and – buttons, accor-
ding to the type freshness and thickness of the bread - (fig. 3). The browning level
selected will appear on the digital display.
- 1 . very slightly browned - 6.7. well toasted
- 2.3. slightly browned - 8.9 very well toasted
- 4.5. lightly browned
• Turn the control lever clockwise until it locks into position - (fig. 4).
• The bread slices will be automatically centred and toasting will begin.
Once the cycle has begun, the remaining toasting time is shown on the digital display.
The control lever can only be locked in the lower position when the toaster is
plugged in.
Any bread protruding out of the slots will not be toasted.
Never leave the toaster unattended during use. We do not recommend toasting
sugar coated bread, use caution when toasting sugar coated or filled items
(such as toaster pastries). Always set browning control to lowest setting.
Before toasting, be sure that the toaster is not under cabinets or other flam-
mable materials such as curtains.
Reduce the browning level if you are toasting only one slice.
For best results, always toast two slices of bread.
The toaster stops automatically when toasting is finished, the control lever returns to the
upright position and the slices of toast pop up - (fig. 5).
Do not use the control lever to stop the toaster during toasting.
STOP AND CHILD SAFETY FUNCTION:
• You can stop toasting at any time by pressing the STOP button.
Do not use the control lever to stop the toasting cycle.
After about ten minutes, the digital display goes automatically into stand-
by mode and comes on again if the control lever is moved or one of the
control buttons is pressed.
• The child safety function is switched on by pressing the STOP button for 3 seconds; the sym-
bol appears on the digital display, the functions are de-activated and the toaster cannot
be used once locked.
• The child safety function is switched off by pressing the STOP button once again for
3 seconds; the symbol disappears from the display and is replaced by the default
setting of 5.