Filter
Top Products
When the desired quantity of espresso has run
through, you stop by pressing the coffee key
or
(9) (10).
Now the quantity is automatically memorized.
. Hot Water Preparation
You can prepare hot water with this
appliance.
• Fill the water tank (1) (2) (3) and start the
appliance (4).
• Place the cup beneath the auto cappuccino
accessory.
• As soon as the control lamp on the hot
water button glows continuously, the
appliance is ready to operate.
• Pressing the hot water button
(15).
• When the desired quantity of water has run
through, you stop by pressing the hot water
key
(15).
2. STEAM FUNCTION
The tapping noise which occurs while steam is
being produced comes from the intermittent
operation of the pump and has no effect on
the proper working of the appliance.
Beware: during and after use of the machine,
the metallic parts of the auto cappuccino
accessory can become burning hot.
. Using the auto cappuccino accessory
The auto cappuccino accessory makes it easy
to produce frothy milk for making a cappuc-
cino, a latte or a hot chocolate.
• Fill the water tank (1) (2) (3) and start the
appliance (4).
• Put the auto cappuccino accessory in place
on the steam nozzle.
• Place a cup under the auto cappuccino
accessory.
• Pour about 100 ml of very fresh, very cold
milk into a container. The milk and its
container must be well chilled.
• Insert the flexible tube into this container or
directly into the milk carton (17).
Please note the straight cut end of tube must
fit inside auto cappuccino device and the
irregular end dipped in milk.
• Turn the setting knob to the position
“cappuccino” or ‘ latte “.
• When the appliance is ready (operating
control lamp glows continuously), press the
steam button
(16), the operating control
lamp blinks.
• When the control lamp of steam button
glows continuously again, appliance is ready
for steam.
• Press the steam button
(16).
• Once the froth has been produced, stop by
pressing the steam button
(16) for the
following cleaning operation in order to
prevent the milk from drying on the auto
cappuccino accessory.
• Place a cup under the auto cappuccino
accessory.
• Immerse the flexible tube into a clean
container 1/3 full of water.
• Press the steam button
(16) and when all
the water has run through, press the steam
key
(16) to stop.
• Next, clean the auto cappuccino accessory
with a damp cloth.
For more thorough cleaning of the auto
cappuccino accessory, please refer to the
paragraph on maintenance.
. Hot chocolate
• Repeat the same procedure as below after
changing the milk with a chocolate beverage
you want to heat up.
• If your espresso machine is ready for steam -
for 5 min without use, the appliance
switches automatically to coffee stand by.
If you wish to make an espresso immediately
after steam, the appliance must first be
allowed to cool down in order to achieve the
correct temperature for preparing an espresso.
• Appliance automatically cools down when
pressing the coffee button (one or two cups)
- When cooling down, the blue operating
control blinks and hot water flows into drip
tray. When correct temperature is reached,
appliance will run espresso cycle.
XP 4050_Europe.P65 28/01/05, 13:5617