Krups ZX7000 Blender User Manual


 
English
12
Pressing by hand:
Raise the lever to the upper position. Place a glass on the drip tray
(J)
, under the pouring spout
(G1)
. Cut your citrus fruits in half.
Turn the ON/OFF selector knob
(K)
to the
MANUAL
position
- Fig.11
. Place your fruit cut side down on the cone
(E)
, applying
pressure against the cone. The cone will automatically start rotating
once pressure is applied. Keep fruit centered and maintain
constant pressure for best results.
When pressing is complete, close the drip stopper
(H)
and remove
your glass.
FOR BEST RESULTS
For optimal juice extraction, press fruit at room temperature. Roll
fruit on a table, using the palm of your hand to apply gentle pres-
sure before cutting in half.
CLEANING
The removable parts
(C-D-F-G-H-I-J)
can be washed in the upper
level of the dishwasher. Wash with warm water and gentle dis-
hwashing liquid.
The pressing lever
(A)
and the lever pin
(B)
cannot be washed in
the dishwasher. Wipe with a soft damp cloth to clean. Always dry
before re-assembling.
Rinse the pulp filter
(F)
after juicing for easy cleaning. Once pulp
has dried on the filter, soak in warm water to loosen the pulp and
then wipe with a sponge. Do not use abrasive or harsh chemical
cleaners or sponges to clean the removable parts.
Note the underside of the base includes a cord wrap that can be
used to organize excess powercord length or store the powercord
when the appliance is not in use.