Filter
Top Products
Pag. 12
MAIN MENU
To access this menu, keep pressed the button PROG for 5 seconds.
The menu is composed by the followings programs:
PAYMENT SYSTEM
Setting of the system of payment and its options.
SET TEMPERATURE
Setting of temperatures and other functions on the boilers.
OPTIONS: INSERT PASSWORD
Entry to the options related to the levels of programming: operator and
technician or manager.
Pag. 17
RESET COUNTERS&AMOUNTS: Reset of all the counters above. Press “6”
to confirm or “5” to cancel.
ENABLE SLAVE MACHINE Enable the “slave” machine (not available).
ENABLE TEMPERAT.ON DISPLAY: Visualization on display of the boiler
temperature.
SERIAL NUMBER: set the serial number of the machine.
CAUTION ! OUTPUT TEST !: test of all the electrical output of the electronic
board (see the chart at page 18).
TYPE OF MACHINE: set-up of the model of the machine.
ENABLE AUTOMATIC WASHING: if enabled, the machine executes an auto-
matic washing cycle at the power-on.
DISPLAY COUNTERS ENABLE: if enabled, at the power-on the display will
show the total counter, which can’t be reseted.
BOILER 1 WORKING: enable of the boiler 1.
Note 1: to avoid the blocks in the mixing group, the software controls the powder
and water values in the way explained in the following diagram.