Filter
Top Products
Pag. 12
EVENTS
In this menu it is possible to notice the last 100 events of the machine.
Entering the menu with D the following data will be visualized:
In the line of the date, you see the time and date of the event.
ID indicates the kind of event, that can be a code drink or an internal operation of
the machine (see chart).
RESULT indicates if the event has gone to good end (GOOD) or an error is oc-
curred (Ennn) where nnn corresponds to a number that the type of error represents
(see chart).
POS indicates the position of the event (from 1 to 100).
To scroll the various events use the keys A and B.
Internal operation codes
94 espresso group positioning
95 cups searching
96 filter counter reached
97 boiler 1 refilling
98 boiler 2 refilling
99 washing
Error codes
E100 arm-cup positioning in “sugar position”
E101 arm-cup positioning in “cup position”
E102 arm-cup positioning in “supplying position”
E103 espresso group positioning in “normal position”
E104 espresso group positioning in “supply position”
E105 espresso supplying
E106 soluble supplying
E107 coffee grinding (grinder 1)
E108 coffee grinding (grinder 2)
E109 sequence file
E110 cup releasing
E111 lack of cups
E112 lack of water
DATA: time & date
ID:XX RESULT POS
Pag. 21
SET FILTER COUNTER
Counter for the limestone filter substitution. Once reached, the machine
will show “*” on display but it will continue to work (see also at page 27).
SET NUMBER OF COFFEE GROUNDS
Counter for coffee grounds emptying. Once reached, the machine will
show “EMPTY GROUNDS” and it will stop (see also at page 27).
REGULAR MODE COUNTERS&AMOUNTS
Regular mode counter. To reset it, press # and D.
TEST MODE COUNTERS&AMOUNTS
Test mode working counter. To reset it, press # and D.
FREE MODE COUNTERS&AMOUNTS
Free mode working counter. To reset it, press # and D.
TOTAL IN PRICE-PERIOD 1
Price-period 1 counter. To reset it, press “#” and D.
TOTAL IN PRICE-PERIOD 2
Price-period 2 counter. To reset it, press “#” e D.
RESET COUNTERS&AMOUNTS
Reset of all the counters above. Press “1” to confirm or “3” to cancel.
ENABLE SLAVE MACHINE
Enable the “slave” machine.
ENABLE TEMPERAT.ON DISPLAY:
Visualization of the boiler temperature on display .
SERIAL NUMBER
Set the serial number of the machine.
CAUTION ! OUTPUT TEST !:
Test of all the electrical output of the electronic board (see the LIST at
page 22). Choose the output with A or B; to supply it, press D.
TYPE OF MACHINE
Set-up of the model of the machine.