Filter
Top Products
3
6/14/05
Manual No. 700-372M
Assembly Instructions
Land Pride
■
Preparations for new Gearbox Mount
Refer to figure 4:
1. Clamp template plate (#1) to vehicle by aligning the
front edge of template with the front edge of the
engine mounting plate.
2. Drill two 1/8" pilot holes in engine plate using holes
provided in the template.
Template Set-up
figure 4
1
Front Edge of Template
& Engine mounting Plate
Clamping
Device
Drill 1/8"
Pilot Holes
23683
Refer to Figure 5:
3. Remove template and redrill pilot holes to 11/32"
diameter.
Pilot Holes Redrilled to 11/32" Diameter
Figure 5
Refer to Figure 6:
4. Assembly 2 3/4" lg. mounting bracket (#2) to gearbox
mounting plate (#1) with two 5/16"-18 x 3/4" lg. GR5
hex head cap screw (#4), 5/16" flat washers (#6) and
hex nylock nut (#5) as shown. Do not tighten.
5. Assembly 3 7/8" lg. mounting bracket (#3) to gearbox
mounting plate (#1) with two 5/16"-18 x 3/4" lg. GR5
hex head cap screw (#4), 5/16" flat washers (#6) and
hex nylock nut (#5) as shown. Do not tighten.
1/8" Pilot Holes
Drilled to 11/32"
23682
Gearbox Mounting Plate Assembly
Figure 6
23679