Filter
Top Products
7
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)
Using the Touchpads
• Press the desired pad.
• Press the number pads to enter time or temperature.
• Press the Autoset 0 pad to enter temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the CANCEL and
Favorite pads for three seconds.
• 12 Hr flashes in the display.
2. Press the Autoset 0 pad to select 24 Hr;
press again to select 12 Hr.
3. Set the time of day following the
directions in the To set the Clock
section.
Oven Cooking
Control Panel
A Bake Use for baking and roasting.
B Broil Use for broiling and top browning.
C Clean Use to set self-clean cycle.
D Convect Roast Use for convection roasting.
E Delay Programs the oven to start baking at
a later time.
F Number Pads Use to set time and temperature.
G Autoset Use to quickly set temperatures.
H Keep Warm Use to keep cooked food warm in oven.
I Convect Bake Use for convection baking.
J Cook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
K Favorite Use to save a specific Cook & Hold
procedure.
L Timer Sets Timer.
M Clock Use to set time-of-day clock.
N Oven Light Use to turn the oven light on or off.
O CANCEL Cancels all operations except Timer
and Clock.
A B C D E F G
H I J K L M N O
Note: Four seconds after pressing the number pads or
the Autoset 0 pad, the time or temperature will automati-
cally be entered. If more than 30 seconds elapse between
touching a function pad and the number pads or the
Autoset 0 pad, the function will be canceled and the
display will return to the previous display.