Filter
Top Products
11
REFRIGERATOR LAMP
1. Unplug the refrigerator’s power cord.
2. Remove the refrigerator compartment’s shelves and
the vegetable tray cover.
3. To remove the lamp cover, pull the lower part with your
hand or a tool.
4. Twist the light bulb counterclockwise.
5. Assembly on the opposite way as disassembly.
The replacement light bulb must be the same
specification of the original. (125V, 20W). Part No. 6912JB2002J
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
Do not connect any other appliance in the same
plug of the refrigerator, if many appliances are
connected the wires might be overloaded,
increasing the risk of voltage variation and
improper operation.
POWER CORD REPLACEMENT
If the power cord gets damaged, you must replace
it for a new one available with the manufacturer or
its service agent.
An empty refrigerator can be a very dangerous
attraction for children. Before you throw away
your old refrigerator or freezer, please take off
the doors and leave the shelves in place so
that children may not easily climb inside.
Please do not let the area near the door
switch get dirty by sweet food or candy, as
ants could interrupt the normal operation of
this switch.
ABOUT GROUNDING (EARTHING)
In the event of a short circuit, the ground
connection reduces the risk of electric shock
while providing an escape line for electric current.
Prevent a possible electric shock, this
appliance must be grounded.
The wrong use of the plug’s earth terminal can
result in an electric shock. Consult a qualified
electrician or service person if the grounding
instructions are not fully understood, or if you
have any doubts about if your appliance is
properly grounded.
This appliance must be grounded
DON’T WAIT! DO IT NOW!
NEVER STORE EXPLOSIVE
OR CHEMICAL SUBSTANCES IN
YOUR REFRIGERATOR.
LAMP REPLACEMENT
RISK OF CHILD ENTRAPMENT
DANGER