Filter
Top Products
3
THIS REFRIGERATOR IS MANUFACTURED WITH EXTREME CAUTION USING THE
LATEST TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE COMPLETELY SATISFIED WITH IT’S
PERFORMANCE AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS MANUAL COMPLETELY.
IT INCLUDES THE EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE ALONG WITH SOME USEFUL TIPS.
INSTALLATION
1. Install in an appropriate location.
Place the refrigerator where it is easily
2. Avoid placing your refrigerator near heat sources,
direct sunshine,or areas of high humidity.
3. There must be an appropriate air flow
around your refrigerator in order to get a good
performance. If your refrigerator is placed close
to the walls, it must have a clearance of 10"
on top and 2" on both sides.
The refrigerator must have a 1” clearance from
the floor, specially if it’s carpeted.
4. To avoid problems, the refrigerator should be
properlyleveled. If necessary, adjust the leveling
screws.
The front must be slightly higher than the back so
the doors will close properly.
The leveling screws are easier to turn if you lean
the refrigerator slightly backwards. Turn the
leveling screws clockwise to raise the front of the
refrigerator and counterclockwise to lower it.
5. Install the refrigerator in a place where the
temperature is between 50° F (10°C) and 104° F
(40°C). If the temperature is higher or lower, the
cooling performance of the appliance can be
diminished.
NEXT
1. Clean your refrigerator and remove dust
accumulated during transportation.
2. Install all accessories, such as ice trays, in the
correct places.
They are packed together to prevent damage
3. Follow the instructions for handle assembly.
5. Connect the power cord to the power outlet.
Do not connect more than one appliance to the
same outlet.
If your refrigerator's power cord has 3 terminals,
DO NOT remove the ground terminal.
Grounding minimizes the risk of electric shock.
This connector requires a 3-terminal power outlet.
If the customer does not have the proper outlet,
he must contact a qualified electrician to have the
proper outlet installed.
5. Before using your refrigerator, let it run for 2 or 3
hours.
Verify the cold air flow at the freezer to ensure
proper cooling. Now your refrigerator is ready to
use.
accessible.
in transit.
4. After moving the refrigerator, wait an hour
before plugging itin to allow the oil to settle
in the compressor.