Filter
Top Products
- 6 -
3-1 DOOR
● Freezer Door
1. Remove the hinge cover by pulling it upwards.
2. Loosen hexagonal bolts fixing the upper hinge to the
body and lift the freezer door.
3. Pull out the door gasket to remove from the door foam
Ass'y.
● Refrigerator Door
1. Loosen hexagonal bolts fixing the lower hinge to the
body to remove the refrigerator door only.
2. Pull out the door gasket to remove from the door foam
Ass'y.
3-2 DOOR SWITCH
1. To remove the door switch, pull out it with a '—' type
driver as shown in (figure 9).
2. Disconnect the lead wire from the switch.
3-3 FAN AND FAN MOTOR
1. Remove the freezer shelf.
2. Remove the Cover Lamp-F and Case Lamp by
loosening 1 screw fixed to ceiling of Inner Case.
3. Remove the Grille by pulling it out.
4. Pull out the Shroud and remove the Fan Motor Assy by
loosening 2 screws.
5. Pull out the fan and, separate the Fan Motor, Brackets
and the Guide Fan.
BOLT
HINGE
HINGE COVER
Figure 6
GASKET
Figure 7
LOWER HINGE
BOLT
Figure 8
Figure 9
3. DISASSEMBLY
GUIDE FAN
FAN
SHROUD
GRILLE
FAN MOTOR
Figure 12
Figure 11