Filter
Top Products
9. Troubleshooting
9-12
9.2.10 Error code E03-04 : Trouble contact of
high speed link
ON
Is there
any station that the power
is off?
Link trouble contact On
No
Yes
Is there
any error of accurance
station among entire other
station?
Change the mode of each
station to Run mode.
Is link-enable of each
station set to ‘On’?
No
Is CPU
operation mode of each
station set to Run
mode?
Set appropriate link-enable to
‘On’ for link-enable setting of
each station.
Check detailed items using the
information monitor of
.
Remove the error of other station.
Yes
End
Yes
Yes
Turn the power on again after
performing necessary action.
No
Is network configuration
perfect?
Check and correct it according
to the flow of error code E01-
01.
Download parameter, and set
link enable setting to ‘On’.
No
Yes
No