Filter
Top Products
SETTING THE CONTROLS
Temperature
• Your refrigerator has a control pad on the dispenser that lets
you regulate the temperature in the freezer and refrigerator
compartments.
• Initially set the REFRIGERATOR CONTROL at 37°F (3°C)
and the FREEZER CONTROL at 0°F (–18°C). Leave it at
this setting for 24 hours (one day) to stabilize. Then adjust
the compartment temperature as desired.
• Every time you touch the freezer temperature adjust
button, the temperature changes in a circulating order of
“0”→“-1” →“-2”→“-3”→“-4”→“-6”→“8”→“6”→“5” →“4”→“3”
→“2”→“1”→“0”.
• Every time you touch the refrigerator temperature adjust
button, the temperature changes in a circulating order of
“37”→“36”→“35”→“34”→“32”→“47”→“45”→“44”→“43”→“42”
→“41”→“40”→“39”→“38”→“37”.
w CAUTION: The control display is operated by touch.
Excessive moisture on the display may cause a
malfunction. Please keep display clean and dry.
NOTE: This is to prevent the unintended working error
when touching again. When 10 seconds has passed
since final touch, the existed display blinks once and
then the key starts to work by second touch.
(LFX25960**/LFX21960** only)
Ice Plus
• When you touch the “ICE PLUS” button, the graphic
[ ] will light up in the display and it continues for 24hours.
It will automatically shut off after 24hours have passed.
Or you can stop this function manually by touching the
button one more time.
• This function imcreases both icemaking and freezing
capabilities.
Dispenser
• You can select water, crushed ice, or cubed ice by
touching button as you desire.
• There could be some dripping after dispensing.
It is recommended to hold your cup for a couple
of seconds after dispensing.
NOTE : The dispenser is desinged not to operate
while either refrigerator door is left open.
Filter
• It displays in months the number of months left to
exchange the filter from the moment power is connected
to the refrigerator.
• If you have changed the filter after 6 months of use or
want to reset the filter display, press and hold the Filter
Reset Button 3 seconds or more and the filter display
will be initialized with a buzzing sound.
NOTE : The average life of the filter is 6 months.
Auto Light (LFX25970**/LFX21970** only)
• The dispenser lamp is on or off automatically by brightness of
the room discovered from the light senser.
Light / Light Sensor (LFX25970**/LFX21970** only)
• If the light is set “Auto” mode, dispenser light will automatically
turn on and off according to the brightness of room detected by
light sensor.
Alarm
• When the power is connected to the refrigerator, door
alarm is initially set OFF and door alarm display will
show . When you touch button, the display will
change to and door alram function is now activated.
• When either refrigerator or the freezer door is left open
for more than 60 seconds, the alarm will ding to let you
know the door is open.
• When you close the door, the door alarm will stop dinging.
• If you want to disable the door alarm function, touch
button then the door alarm display will switched to .
Lock
• When the power is initially connected to the refrigerator,
Lock Function is Off.
• If you want to activate Lock Function to lock other
buttons, press and hold button for 3 seconds or
more. sign will be displayed and the Lock Function
is now enabled.
• No buttons other than button will work even
including dispenser button while Lock Function is
enabled.
• To disable the Lock Function, press and hold button
for 3 seconds or more.
Temperature Mode Switch Function (°F <->°C)
• If you want to convert °F to °C or vice versa, press and
hold button and button simultaneously for 5
seconds or more.
ENSURING PROPER AIR CIRCULATION
Do not block air channels with any objects or food for air
circulation to prevent food loss due to the lack of cooling
air.
USING YOUR REFRIGERATOR
(LFX25970**/LFX21970**)
(LFX25960**/LFX21960**)
18