Filter
Top Products
HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT To avoid possible injury or product or
property damage, you will need two people to perform the
following instructions.
2. Installing Pullout Drawer
• With both hands, hold the center bar and push it out to
let both rails out to full extension simultaneously.
• Hook door supports (1) into rail tabs (2).
• Lower door into final position and tighten the screws (3).
• Make sure you have a right rail cover for each side.
• Align the top holes of the rail cover with the top holes of
the door supports to assemble the rail covers.
• With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.
DO NOT step or sit down on freezer door.
4
1
2
3
Right
Rail Cover
Left
Rail Cover
Assembly Hole
18
REFRIGERATOR INSTALLATION
w WARNING
w WARNING