Filter
Top Products
SETTING THE CONTROLS
Temperature
• Your refrigerator has a control pad on the dispenser that lets
you regulate the temperature in the freezer and refrigerator
compartments.
• Initially set the REFRIGERATOR CONTROL at 37°F (3°C)
and the FREEZER CONTROL at 0°F (–18°C). Leave it at
this setting for 24 hours (one day) to stabilize. Then adjust
the compartment temperature as desired.
• Every time you press the freezer temperature adjust
button, the temperature changes in a circulating order of
0 → -1 → -2 → -3 → -4 → -6 → 8 → 6 → 5 → 4 → 3 → 2
→ 1 → 0 .
• Every time you press the refrigerator temperature adjust
button, the temperature changes in a circulating order of
37 → 36 → 35 → 34 → 32 → 47 → 45 → 44 → 43 → 42
→ 41 → 40 → 39 → 38 → 37 .
Ice Plus
• When you press the ICE PLUS button, the graphic
[ ] will light up in the display and it continues for 24
hours. It will automatically shut off after 24 hours have
passed.
Or you can stop this function manually by pressing the
button one more time.
• This function increases both icemaking and freezing
capabilities.
Dispenser
• You can select water, crushed ice, or cubed ice by
pressing the button as you desire.
• There could be some dripping after dispensing.
It is recommended to hold your cup for a couple of
seconds after dispensing.
NOTE The dispenser will not to operate while
either refrigerator door is left open.
Filter
• It displays in months the number of months left to
exchange the filter from the moment power is connected
to the refrigerator.
• If you have changed the filter after 6 months of use or
want to reset the filter display, press and hold the Filter
Reset Button 3 seconds or more and the filter display
will be initialized with a buzzing sound.
NOTE The average life of the filter is 6 months.
Alarm
• When the power is connected to the refrigerator, door
alarm is initially set OFF. When you press the
button, the LED will turn on and door alarm function
is now activated.
• When either refrigerator or the freezer door is left open
for more than 60 seconds, the alarm will ding to let you
know the door is open.
• When you close the door, the door alarm will stop dinging.
• If you want to disable the door alarm function, press the
button then the door alarm LED will turn off.
Lock
• When the power is initially connected to the refrigerator,
Lock Function is Off.
• If you want to activate Lock Function to lock other
buttons, press and hold the button for 3 seconds or
more. The LED will be turned on and the Lock
Function is now enabled.
• No buttons other than the button will work even
including dispenser button while Lock Function is
enabled.
• To disable the Lock Function, press and hold the
button for 3 seconds or more.
Ambient Temperature Display Window.
• Temperature is displayed only between
16°F ~ 120°F (-9°C ~ 49°C).
• Temperature less than 15F (-9°C) is
indicated with LO, and temperature more
than 121°F (49°C) is indicated with HI.
Temperature Mode Switch Function (°F <->°C)
• If you want to convert °F to °C or vice versa, press and
hold the button and the button simultaneously
for 5 seconds or more.
USING YOUR REFRIGERATOR
20