Filter
Top Products
HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or
property damage, you will need two people to perform the
following instructions.
2. Installing Pullout Drawer
• With both hands, hold the center bar and push it out to
let both rails out to full extension simultaneously.
• Hook door supports (1) into rail tabs (2).
• Lower door into final position and tighten the screws (3).
• Make sure you have a right rail cover for each side.
• Align the top holes of the rail cover with the top holes of
the door supports to assemble the rail covers.
• With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
w WARNING: To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.
w WARNING: DO NOT step or sit down on freezer door.
REFRIGERATOR INSTALLATION
14
Right
Rail Cover
Left
Rail Cover
Assembly Hole