![](http://pdfasset.owneriq.net/c/f9/cf9537bc-6f4e-4dd3-98a4-0d7db33debd8/cf9537bc-6f4e-4dd3-98a4-0d7db33debd8-bg16.png)
K. REMOVING THE TURNTABLE MOTOR
(1) Remove the turntable.
(2) Remove the turntable shaft VERY CAREFULLY
with a slotted screwdriver. (Figure 19)
(3) Remove the base plate by removing 6 screws
securing it to the oven cavity. (Figure 20)
(4) Disconnect the leadwire from the turntable motor
terminals.
(5) Remove the 2 screws securing the turntable motor
to the oven cavity ASS'Y. (Figure 21)
NOTES:
• Remove the leadwire from the turntable motor
VERY CAREFULLY.
• Be sure to grasp the connector not the wires when
removing.
Wire Leads
Turntable Motor
Figure 21
Figure 19
Figure 20
7-11