LG Electronics LMVM1955SW Microwave Oven User Manual


 
- 11 -
OPERATION
1. Touch TIMER pad.
2. Enter the time by using the
number key pad.
3. Touch START pad.
When the time is over, you will
hear seven beeps and END
will display.
Example: To time 3 minutes.
TIMER
You can use your microwave oven as a timer. Use the
Timer for timing up to 99 minutes, 99 seconds.
LIGHT TIMER
You can set the
LIGHT
to turn on and off automatically
at any time you want. The light comes on at the same
time every day until reset.
1. Touch LIGHT TIMER pad.
2. Enter the time you want the
LIGHT to turn on.
3. Touch START pad.
4. Touch 1 pad.
(Press 1 for AM.,
press 2 for PM.)
5. Touch START pad.
6. Enter the time you want the
LIGHT to turn off.
7. Touch START pad.
8. Touch 1 pad.
(Press 1 for AM.,
press 2 for PM.)
9. Touch START pad.
Example: Turn on 2:00 AM, turn off 7:00 AM.
1. Touch LIGHT TIMER pad.
2. Touch STOP/CLEAR pad.
NOTE: To reset that time to turn on and off the
LIGHT, repeat steps 1 to 9.
Example: To cancel the LIGHT TIMER.
NOTE: If you want to cancel the LIGHT TIMER in
operation, you should touch key.
LIGHT
HI-LOW-OFF
CHILD LOCK
You may lock the control panel to prevent the
microwave from being accidentally started or used by
children.
The Child Lock feature is also useful when cleaning the
control panel. Child Lock prevents accidental
programming when wiping the control panel.
1. Touch STOP/CLEAR pad.
2. Touch and hold 0 pad more
than 4 seconds. LOCKED will
appear in the display window
with two beeps.
Example: To set the child lock.
1. Touch and hold 0 pad more
than 4 seconds. LOCKED will
disappear and you hear two
beeps. At this time the oven
is ready.
Example: To cancel the child lock.
Ez-ON
A time-saving pad, this simplified control lets you
quickly set and start microwave cooking without the
need to touch START pad.
NOTE:
If you touch Ez-ON, it will add 30 seconds up to 3
minutes; after 3 minutes, every touch will add 1 minute
up to 99 min 59 seconds.
1. Touch Ez-ON pad 4 times.
The oven begins cooking and
display shows time counting
down.
Example: To set Ez-On for 2 minutes.