Filter
Top Products
HOW113USE
REMOVING AND REPLACING COMPONENTS ((:ONT.)
TO remove the glass
• Lift up the glass under the crisper cover.
• Pull the glass up and out.
To replace Glide'N'Serve
• To remove, pull the drawer out to full extension.
• Lift the front of the drawer up, then pull it straight
out.
• To install, slightly tilt up the front and insert the
drawer into the frame and push it back into
place.
NOTE: Removing the fixed door bin is
recommended to reduce the risk of door bin
scratches.
,CAUTION
• When you close the refrigerator door with
GLIDE'N'SERVE DRAWER opened,
that the drawer could be broken.
34