Filter
Top Products
- 3 -
English
Español
Français
SAFETYPart 1
IMPORTANT NOTE
This installation must be completed by a qualified installer or technician.
•
Please read the entire Installation Instructions prior to installation.
•
Remove all packing materials from the oven compartments before connecting the electrical supply to
the oven.
•
Installer: please retain these instructions for local inspector’s reference, then leave them with the
consumer.
•
Consumer: please read and keep these instructions for future reference and be sure to read the entire
OWNER’S MANUAL prior to use.
IMPORTANT NOTE
Proper installation is the responsibility of the installer
and product failure due to improper installation is
NOT covered under warranty.
PREPARE TO INSTALL THE OVEN
IMPORTANT NOTE
Observe all governing codes and ordinances.
This appliance must be properly grounded.
WARNING
• The information in this manual
should be followed exactly.
- A fire or electrical shock may result causing
property damage, personal injury or death.
WARNING
• DO NOT put any weight on the oven
door. Never allow anyone to climb,
sit, stand or hang on the oven door.
- The oven could tip and injury might result from
food or the oven itself.
WARNING
• The electrical power must be shut off
while the electrical connections are
being made.
- Failure to do so can result in severe personal injury,
death or electrical shock.
Phillips Screwdriver
Junction Box
30” (76.2 cm)
Metal Bottom Trim
6 Wood Screws
For Mounting
(4 needed for
installation and 2
extra’s)
6 Screws For
Bottom Trim
(3 needed for installation
and 3 extra’s)
Wire Nuts
36” (91 cm)
of String
3/4” Conduit
Connector
Drill
PREPARE TO INSTALL THE OVEN
MATERIALS NEEDED