Filter
Top Products
6
Please keep for future reference. Read and follow all instructions before using your oven to
prevent the risk of fire, electric shock, personal injury, or damage when using the oven.
This guide does not cover all possible conditions that may occur. Always contact your
service agent or manufacturer about problems that you do not understand.
19. The oven should be cleaned regularly and any food deposits should be
removed.
Failure to maintain the oven in a clean condition could lead to
deterioration of the surface. This could adversely affect the life of the
appliance and possibly result in a hazardous situation.
20. Only use the temperature probe recommended for this oven.
You can not ascertain that the temperature is accurate with an unsuitable
temperature probe.
21. If there are heating elements, the appliance becomes hot during use.
Care should be taken to avoid touching the heating elements inside the
oven.
There is danger of a burn.
22. Follow exact directions given by each manufacturer for their popcorn
product. Do not leave the oven unattended while the corn is being
popped. If corn fails to pop after the suggested times, discontinue
cooking. Never use a brown paper bag for popping corn. Never
attempt to pop leftover kernels.
Overcooking could result in the corn catching a fire.
23. This appliance must be earthed.
The wires in the mains lead are colored in accordance with the
following codes
BLUE ~ Neutral
BROWN ~ Live
GREEN & YELLOW ~ Earth
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in
your plug proceed as follows:
The wire which is colored BLUE must be connected to the terminal
which is marked with the letter N or Colored BLACK.
The wire which is colored BROWN must be connected to the terminal
which is marked with the letter L or colored RED.
The wire which is colored GREEN & YELLOW or GREEN must be
connected to the terminal which is marked with the letter E or .
If the supply cord is damaged, it must be replaced by the
manufacturer, a service agent or a similarly qualified person in order
to avoid potential hazards.
Improper use may cause serious electric damage.
Important Safety
Instructions
CAUTION