Filter
Top Products
REFRIGERATOR INSTALLATION
REMOVING REFRIGERATOR DOORS
1. Removing Refrigerator Door
NOTE: Handle appearance may vary.
IMPORTANT: Before you begin, turn the refrigerator OFF and unplug it. Remove food and any bins from doors.
Left Door
Disconnect water supply tube by pushing back on the disconnect ring (3).
Loosen the screws and remove the cove on back side (see figure A).
Loosen the cover screw (1).
Disconnect door switch wire (2).
Pull out the tube (4).
CAUTION: If a tube end is deformed or worn out, cut the damaged portion away.
Disconnect wire harness (5).
Remove the ground screw (6).
Loosen screws (7) and lift off the top hinge (8).
CAUTION: When removing top hinge, be careful that the door does not fall forward.
Right Door
Loosen the cover screw (1).
Disconnect door switch wire (2).
Place the door on a non-scratching surface with the inside up.
Loosen screws (7) and lift off the top hinge (8).
Place the door on a non-scratching surface with the inside up.
Figure A
3
10
(7)
(1)
(8)
(2)
(2)
(7)
(5)
(6)
(4)
(8)
(1)