Filter
Top Products
REFRIGERATORINSTALLATION
REFRIGERATOR INSTALLATION
13
HOW TO REMOVE AND INSTALL THE
PULL OUT DRAWER
IMPORTANT: To avoid possible injury or product or property
damage, you will need two people to perform the following
instructions.
2. Installing Pullout Drawer
• With both hands, hold the center of the bar and pull it
out to let both rails out to full extension simultaneously.
• Hook door supports (1) into rail tabs (2) .
• Lower door into final position and tighten the screws (3)
• Make sure you have a right rail cover for each side.
• Align the top holes of the rail cover with the top holes
of the door supports to assemble the rail cover.
• With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
WARNING: To prevent accidental child and pet
entrapment or suffocation risk. DO NOTallow them to
play inside of drawer.
WARNING: DO NOT step or sit down on Freezer Door.
Assembly Hole
Right
Rail Cover
Left
Rail Cover
1
2
3
4