Filter
Top Products
6
INSTALLATION INSTRUCTIONS
INSTALLING THE COOKTOP UNIT
1. LOCATE ELECTRICAL OUTLET
AND GAS SHUT-OFF VALVE
BENEATH CABINET
2. INSERT COOKTOP INTO CUTOUT
3. LOCATE RETAINER BRACKETS
NEVER RE-USE
OLD FLEX
CONNECTORS.
INSTALL THE RETAINER BRACKETS
Install the retainer brackets to the bottom
of the cooktop unit. then snug the bolts
against the bottom of the countertop as
shown
NOTE: The retainer brackets MUST be
installed to meet local codes or, in their
absence, with the National Electrical Code
ANSI/NFPA No. 70, latest edition.
4
Install a manual shut-off valve in the gas line
in an easily accessible location outside the
cooktop. Be sure you know how and where to
shut off the gas supply to the cooktop. Install
the electrical outlet 12˝ below the countertop.
Insert the cooktop centered into the cutout
opening. Be sure the front edge of the
countertop is parallel to the cooktop. Make
final check that all required clearances are
met.
Remove the retainer brackets from the
literature package.
Electrical
outlet 12˝
below
countertop
Shut-Off
valve
Retainer brackets
Cooktop
Screw
Retainer brackets
Countertop