Filter
Top Products
24
TroubleshooTing
Motor seems to
run too long
- Is the ambient temperature too hot? See Safety Regulations.
- Has the appliance been opened too often or left open too long?
- A large amount of food has been added.
- Unit is in Supercooling mode. Verify unit is in normal operation mode.
The temperature is
not cold enough
Appliance does not work,
display is OFF
The interior light does
not come ON
Loud running noise
- Is the appliance turned ON properly?
- Is the power source plug properly inserted in the socket?
- Is the circuit breaker or fuse in operating condition?
- Is the refrigerator compartment turned ON?
- Has the door been open for more than 15 minutes?
- Is the temperature setting correct? See Setting the Temperature.
- Has an excessive amount of fresh food been placed in the appliance?
- Does a separately installed thermometer show the correct reading?
- Is the ventilation system working properly?
- Is the appliance set up too close to a heat source?
- Is the appliance standing firmly on the floor, or does the compressor
cause nearby items of furniture or objects to vibrate? If necessary, move
the appliance slightly, align by adjusting the adjustable feet, or move
bottles and containers apart.
If a problem occurs during operation, check whether it is due to an operating error.
Please note that even during the warranty period, some repair costs may be your responsibility.
You may be able to correct the following faults by checking the possible causes yourself:
Problem Possible Cause and Remedy
Freezer temperature
display shows two
dashes ‘‘- -”.
The freezer temperature display will only show temperatures that are
below freezing. When initially starting the freezer it will not be below
freezing. It will take three to five hours (depending on ambient conditions)
for freezing temperatures to be achieved and thus displayed numerically.
This may also occur after a power failure.