Filter
Top Products
4
Please read and follow these
instructions
These instructions contain Warning and Caution
statements. This information is important for safe
and efficient installation and operation.
Always read and follow all Warning and Caution
statements!
Danger indicates a hazard which
will cause serious injury or death if
precautions are not followed.
Warning indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
Caution indicates a potentially hazardous
situation which, if not avoided, may result
in minor or moderate injury.
IMPORTANT
This highlights information that is especially
relevant to a problem-free installation and
operation.
Make sure incoming voltage is the same as the
appliance rating.
To reduce the risk of fire, electric shock, or
personal injury, installation work and electrical
wiring must be done by a qualified electrician
in accordance with all applicable codes and
standards, including fire-rated construction.
SAFETY
Disposal of Old Appliance
Risk of child entrapment. Before you
discard your old refrigerator or freezer:
• Be sure to follow your local require-
ments for disposal of appliances. Dis-
carded appliances can be dangerous.
• Remove the doors.
• Leave the shelves in place so that
children may not easily climb inside.
• Cut off the power cable from the
discarded refrigerator. Discard
separately from the refrigerator.
Following these instructions reduces the
possibility of causing personal injury,
especially to children playing.
Contact the trash collection agency in
your area for additional information.
Electrical Safety
Connect this appliance to a 110-120 VAC, 15 amp
circuit that is controlled by a circuit breaker or
fuse. This appliance should have its own separate
grounded circuit. Do not use an extension cord.
The power cord is equipped with a three-prong
(grounding) plug for your protection against
possible shock hazards. To maintain this protection:
• Do not modify the plug by removing the round
grounding prong.
• Do not use a two-prong adapter. Where a two-
prong wall receptacle is encountered, contact
a qualified electrician and have it replaced with
a three-prong receptacle in accordance with all
local codes and ordinances.
• Do not use a power cord that is frayed or
damaged.