Filter
Top Products
16
Levelling the appliance
1. Adjust the height of the
appliance at the front by
twisting the adjustable
feet
1
(A/F 27). Use
the open-ended spanner
provided.
Caution!
The front feet of the ap-
pliance must be firmly
placed on the floor.
2. Adjust the height of the appliance
at the rear by turning the adjusting
bars
2
.
Turn the adjusting bars clock-
wise until the compressor mount-
ing plate touches the anti-tipping
bracket.
Adjusting the front of the drawer
If required, the front of the freezer drawers can be adjusted.
Transfer the screws shown in the illustration (on the left and right
sides of the freezer drawer) individually to the long slots below.
Tighten the screws in the front of the drawer once it is in the right
position.
Side view of the freezer drawer
pulled out
Fasten the appliance in the recess
Fasten the appliance in the recess through the upper and lower
hinges of the refrigerator doors.
Use 2 screws for each hinge.
screws
(4 x 16 mm)