12
WF1051 / WFI 1051
A delight in freshness
To Clean the IceMaker
The IceMaker (arrow in Figure J) can be cleaned
by using this procedure.
1. Pull out the drawer and remove the ice.
2. Clean the drawer with warm water and mild dish
detergent.
3. To access the IceMaker for cleaning:
a. With the drawer pulled out, press and hold
the “ON/OFF” button until the LED goes out
(takes about 1 second).
b. Continue to hold the button and after 10
seconds the LED will start to flash.
c. Insert the drawer while the LED is flashing
The IceMaker should rotate down into the
cleaning position.
d. Remove the drawer.
4. Clean the IceMaker with warm water. If you need to use a
cleaning aid, use a mild dish detergent and rinse. You will
need to throw out the first three batches of ice if you use
any soap.
5. Push the “ON/OFF” button until the LED lights and insert
the drawer.
6. Throw out the first three batches of ice to remove any
soap residue.
Note
If you need to leave the IceMaker off, clean the IceMaker
but do not push the “ON/OFF” button in Step 5.
Figure J
ICEMAKER