Filter
Top Products
12
OPERATION
• Now select ON or OFF by pressing the ventilation
button briefly:
For C = childproof lock, press the /(UP/
DOWN) button to select
C 1 = childproof lock on or
C 0 = childproof lock off and acknowledge with
the Ventilation button.
When the symbol is lit, the childproof lock is
activated.
Figure 16
For = brightness, press /(UP/DOWN) button
to select
1 = minimum to
5 = maximum brightness and acknowledge with
Ventilation button.
Figure 17
For = unit of temperature, press / (UP/
DOWN) button to select °C= to display degrees
Celsius, °F = to display degrees Fahrenheit
for temperature display and acknowledge with
Ventilation button.
LBR070
Figure 18
Exit set-up mode:
• Exit the set-up mode by pressing the ON/OFF
button; after two minutes the electronic system
switches over automatically. The normal operating
mode is activated again.
Additional Functions - Figures 14 - 18
In setup mode you can set the Childproof Lock,
adjust the brightness of the display and choose
the unit of temperature for the display in degrees
Fahrenheit or degrees Celsius. The childproof lock
is designed to protect the appliance from being
switched off accidentally by children.
Activating set-up mode at upper control unit -
Figure 14
Figure 14
Activating set-up mode at lower control unit -
Figure 15
Figure 15
Activating set-up mode:
• Press the ventilation button for approximately five
seconds - the Ventilation button flashes - the dis-
play shows C for childproof lock.
Note: the value to be altered flashes.
• Select the required function by pressing the
/(UP/DOWN) button:
C = Childproof Lock,
= brightness or
= changing the temperature display.