Linear DUAL-824 Food Processor User Manual


 
32
4.13.3 4 BY 2 POINT-TO-POINT ARMING (CLOSING) CODES
PURPOSE:
To view and edit the force arming report code. This report is sent when
force arm is enabled (Section 4.12) and the system is armed with any
open sensors that have been bypassed.
NOTE: With either reporting method, the force arming code is the
same.
USER RESPONSE:
ACCESS CODES (CLOSE)
FORCE-ARM: Enter a new two-digit force arming code if it needs to
be changed.
NOTE: Entering a “0” for a force arming code will prevent it from
reporting.
217473 C - IMAGE 34