6
OPERATING YOUR REFRIGERATOR
Temperature Control
• Your refrigerator has one control for regulating the
temperature. The temperature control is located inside the
refrigerator compartment.
• The first time you turn the unit on, adjust the temperature
control knob to “MAX” and run for at least 2 hours before
putting foods inside. This will ensure the cabinet is
thoroughly chilled before food is put in.
• The range of the REFRIGERATOR temperature control is
from position "MIN" the warmest to "MAX" the coldest.
Adjust the temperature control to the setting that best suits
your needs. The setting of “MED” should be appropriate
for home or office refrigerator use.
• NOTE;
• If the unit is unplugged, loses power; you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the refrigerator will not start.
• Large amounts of food will lower the cooling efficiency of the appliance.
• Do not place the foods on the air outlet, and leave spaces for airflow.
• If you choose to change the thermostat setting, adjust thermostat control by one
increment at a time. Allow several hours for temperature to stabilize between
adjustments.
Replacing Your Light Bulb
• Unplug the AC power cord from the wall.
• Push up the tab underneath the lamp cover.
• Pull down to remove lamp cover.
• Remove the light bulb.
• Replace the light bulb with a similar size (10W).
• Fit the lamp cover on.