Filter
Top Products
Remove the ice basket.
1. Turn the drain cap counter-clockwise to drain out the water.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. The outside of the ice maker should be cleaned regularly with a mild detergent solution and
warm water.
4. Dry the interior and exterior with a soft cloth.
5. Close the drain cap.
6. When the machine is not in use, open water drain cap to drain water completely from water
reservoir.
The ice maker should be cleaned on a regular basis. (See: “HOW TO CLEAN”)
It is necessary to have adequate ventilation space around the ice maker in order to
sustain proper performance, dissipation of heat, maintain efficiency, and low power
consumption. Clearance of minimum 5 inches should be maintained at the rear and sides
of the unit and 8 inches at the top of the unit.
To attain proper performance, be sure to plug the appliance into a properly grounded
115V/60 Hz outlet.
Do not modify the power cord under any circumstances to allow the unit to be plugged
into a non-grounded outlet. To avoid heat damage to the power cord, please ensure that it
does not come in proximity or in direct contact with the compressor of the ice maker.
Please avoid installing the ice maker in a location where the appliance will come in
contact with water or moisture to minimize rusting of metal parts.
The ice maker should not be installed near any heat source or in a location where it will
come in direct contact with the sunlight.
6
HOW TO CLEAN
CARE AND MAINTENANCE