8
Operating Basics
Basic Instructions
1. Touch the CLOCK Pad. “CLOCK
ENTER TIME” Will be displayed.
2. Set the time of day by touching the
appropriate numbers. The selected time
appears and “PRESS CLOCK AGAIN”
will be displayed.
3. Touch the CLOCK Pad again. The colon
will flash.
Time-of-Day Clock
◆ Afer plugging in the oven or after a power
outage, the Display will scroll “TOUCH
CLOCK PAD TO ENTER TIME OF DAY”.
Touch the CANCEL/OFF Pad and set the
clock following the directions above.
◆ The “time-of-day” clock is a 12 hour clock.
◆ If set, the time of day will always be displayed
when no other cooking function is being used.
◆ The time of day returns to the current time
when the oven turns off.
Basic Instructions
1. Touch the COOK TIME Pad. “ENTER
COOKING TIME” Will be displayed.
2. Enter the cooking time by using the
number pads.
For example, for 5 minutes touch number
5,0,0. The selected time and “PRESS
START” will be displayed.
3. Touch the START Pad again. “COOK
TIME” and selected time will be dis-
played.
◆ The cooking time will appear in the
Display window.
◆ The oven will start cooking and time
countdown will begin.
◆ The oven will stop automatically when
the time is done and beep three times.
◆
When the cook time ends, “END COOK”
appears in the Display.
Cook Time/Power Level
◆ Start with the shortest recommended time and
add more time as needed.
◆ Check the food as it cooks.
◆ The oven door can be opened any time during
operation. It will automatically stop and
maintain the time setting until the door is
closed and the START Pad is touched again.
◆
If the START Pad is touched and the oven does
not operate, check the area between the door
and door seal for obstructions. The oven will
not start until the door is completely closed.
Note . . .
◆ Full power is automatic. If you wish to use
a different power level, touch the POWER
Pad before touching START Pad.
“POWER LEVEL IS HI [10]. TOUCH 1-9
FOR NEW POWER LEVEL. PRESS
START” will be displayed. Enter the power
level desired by touching the appropriate
number pad. The selected power level and
“PRESS START” will be displayed. (See
Cooking Guide on page 9).