Filter
Top Products
10
CARE AND MAINTENANCE
Meat left behind in the feeder head may be removed from the inside of the appliance by
passing a slice of bread through.
1. Before cleaning the appliance, switch off and unplug from the
electrical outlet.
2. Press the release button and turn the whole cutter housing in the
direction of the arrow. Remove the pusher and the tray. (fig. 12 +
13)
3. Unscrew the screw ring and remove all parts of the cutter housing.
WARNING: DO NOT CLEAN THE PARTS IN DISHWASHER.
4. Wash all parts that have come into contact with meat in hot soapy
water. Clean the appliance immediately after use.
5. Rinse the parts with clear hot water and dry them immediately.
6. Lubricate the cutter unit and the grinding discs with appropriate
amount of vegetable oil.