Filter
Top Products
EN
6
OPERATING YOUR WINE COOLER
1. POWER BUTTON
2. INTERIOR LIGHT BUTTON: To manually illuminate/extinguish the interior light
3. TEMPERATURE DISPLAY: Displays cabinet temperature
4. TEMPERATURE “UP” BUTTON: Increase Pre-Set Temperature
5. TEMPERATURE “DOWN” BUTTON: Decrease Pre-Set Temperature
Temperature Control
When you plug in your unit for the first time, the temperature will automatically be set to 50°F. The
temperature display window will show the cavity temperature at that exact moment.
The shown temperature reading will change as the cavity temperature continues to change until the
desired pre-set temperature is achieved. The lead-time to achieve the pre-set temperature depends
on the nature and quantity of the object placed inside the cavity.
The temperature range can be set as low as 39°F or as high as 72°F to suit your specific storage
requirements. You can adjust the desired temperature by pressing the ‘UP’ and ‘Down’ temperature
buttons on the control panel.
The actual cabinet temperature in thermal electric units is dependent on the ambient room
temperature. Thus, the unit may not reach the desired preset temperature. For example, when the
ambient temperature is 77°F, the lowest cabinet temperature that the wine cooler can reach is
approximately 50°F. When the ambient temperature is 70°F, the cabinet temperature can reach
approximately 43°F.
In the event of a power failure or interruption, all modified settings will be lost and the default settings
will be restored once power resumes.
This unit does not have a warming function. For example, when the ambient temperature reaches
below the pre-set temperature, the unit will stop running. The unit will reactivate after the ambient
temperature is higher than the pre-set temperature.