Filter
Top Products
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
-5-
preparing the unit for use
1. Place the unit on a clean, dry, fl at surface.
2. If Ice Reservoir is not yet installed, place the Ice Reservoir
on the unit front fi rst, then push down fi rmly on the back to
click it into place. (Figure 1)
NOTE: IF THE ICE RESERVOIR IS NOT SEATED FIRMLY IN
PLACE, THE SHAVER UNIT WILL NOT OPERATE.
3. Remove the Power Cord Storage Door at the back of the unit
by pushing down on the release tab. Remove the Power Cord
and plug into a standard 120-volt socket (Figure 2). Replace the
Power Cord Storage Door, and position the Power Cord in the
slot provided.
Adding Ice to the Ice
Reservoir
4. Remove the Ice Reservoir Lid by rotating it
counter-clockwise and lifting up. (Figure 3)
5. Fill the Ice Reservoir with ice cubes to the
“Ice Level” Line (Figure 4).
NOTE: FOR BEST RESULTS, USE ICE THAT HAS BEEN
OUT OF THE FREEZER FOR 10 TO 15 MINUTES.
6. Replace the Ice Reservoir Lid by rotating it clockwise
back into place. (Figure 5)
Making frozen
drinks
And now for the fun part! You are just a few short steps away from enjoying your perfectly
blended, restaurant-style frozen drink. Before you use your Frozen Concoction Maker
™
for the f irst time, we recommend that you read through these simple steps to get to know the
features of this unit. Before you know it, you’ll be whipping up perfect drinks for your guests!