Marvel Industries 6SBAR Refrigerator User Manual


 
4
Roll-out Shelves: The roll-out shelves may be pulled
out approximately 14 inches to facilitate product loading
and retrieval. Do not lean on or press down heavily on
the shelves, doing so may damage the shelves or their
content. Pull out shelves gently to minimize any possible
item shifting. To maintain stability, avoid pulling out more
than one shelf at any time.
The roll-out shelves are equipped with a removable
center section that allows you to customize the stor-
age capability of your beverage center. Your unit is
shipped with two glass shelves,one wine rack, one
wooden bottle cradle, and one fixed wire shelf. For
added versatility, additional center sections are avail-
able. Please contact dealer or see Marvel’s website at
www.marvelindustries.com
for ordering.
Single Bottle Racks: Because bottles are not stacked
on top of each other, you can easily view and access
your inventory without disturbing other bottles.
Before Calling for Service
Before calling for service, check the trouble shooting
table on this page. This table lists possible problems
that you can remedy without difficulty to avoid an unnec-
essary service call.
If you do need service, contact your dealer or the manu-
facturer. In any correspondence, refer to the model
number and serial number of your unit which is located
on the lower front cabinet flange. Retain you proof of
purchase. You may want to record these numbers in the
space provided on this page. Follow the procedure out-
lined on page 5.
Problem
Odor in cabinet
Noisy operation
Cabinet vibrates
Cabinet light not working
Appliance will not run
Appliance runs too long
Moisture collects inside
Moisture collects on outside
surface
Interior too hot/too cold
Possible
Causes/Solutions
•Interior needs cleaning
•Cabinet not level
•Weak floor
•Cabinet not level
•Weak floor
•Tube burned out
•No power at outlet
•Temperature control turned
to “OFF”
•Line cord not plugged in
•No power at electrical outlet
•House fuse blown
•Prolonged door openings
•Control set too cold
•Condenser needs cleaning
•Too many door openings
•Prolonged door openings
•Hot, humid weather
increases condensation
•Hot, humid weather
increases condensation. As
humidity decreases,
moisture will disappear.
•Control improperly set.
•Control improperly set
•Faulty thermometer
•Relocate thermometer to
center of cabinet and
recheck