Filter
Top Products
5
CAUTION!
GROUND REQUIRED
FOR SAFE OPERATION
The portion of this manual covering refrigeration and electrical components contains technical instructions
intended only for persons qualified to perform refrigeration and electrical work. This manual cannot cover every
installation, use or service situation. If you need additional information, call or write us:
Customer Service Department
Master-Bilt Products
908 Highway 15 North
New Albany, MS 38652
Phone: 800-684-8988
Fax: 866-882-7629
WARNING LABELS AND SAFETY INSTRUCTIONS
This symbol is the safety-alert symbol. When you see this symbol on your cabinet or in
this manual, be alert to the potential for personal injury or damage to your equipment.
Be sure you understand all safety messages and always follow recommended precautions
and safe operating practices.
NOTICE TO EMPLOYERS
You must make sure that everyone who installs, uses or services your cabinet is thoroughly familiar
with all safety information and procedures.
Important safety information is presented in this section and throughout this section and throughout the
manual. The following signal words are used in the warnings and safety messages:
DANGER: Severe injury or death will
occur if you ignore the message.
WARNING: Severe injury or death can
occur if you ignore the message.
CAUTION: Minor injury or damage to your cabinet can occur if you ignore the message.
NOTICE: This is important installation, operation or service information. If you ignore the
message, you may damage your cabinet.
The warning and safety labels shown throughout this manual are placed on your Master-Bilt Products
cabinet at the factory. Follow all warning label instructions. If any warning or safety labels become
lost or damaged, call your customer service department at (662) 534-9061 for replacements.
This label is located on top of the electrical control This label is attached to the cabinet power cord
label and on the wiring channel. on models with a power cord.