Maytag 3183636 Oven User Manual


 
Replace the oven racks.
Replace the single oven or upper double
oven door by partially fitting the door
hinges into the hinge slots. Pull door slightly
toward you; then slide door completely in
place. Reinstall the two oven-door screws
(if required for your oven door). If door
does not close, you have not pushed
hinges completely into frame. Repeat for
lower oven door.
11
n
Turn on the power supply. ‘PF”
should appear in the’temperature
display and “88:88” should appear in the
clock display. Press the “CLOCK/SET”
button. ‘TIME, HR AND MIN” will light in
the display. ‘0:OO” will appear and “:” will
be flashing. Press the “HOUR” and
“MINUTE” arrows to set the clock to the
correct time of day. Press the
“START/ENTER” button to start the clock.
12
n
Check the operation of the
single oven or upper oven. Press the
“BAKE” but-ton. ‘350”” will appear in the
display. Press the “START/ENTER” button
to start the bake operation. In 1-2
minutes, the bottom element should
glow red. The upper element should
become hot, but not glow red. The
single or upper oven indicator light
should be on and the oven should be
heating.
The oven indicator light goes off when
the oven is preheated.
Press the “OFF/CANCEL” button,
TEMPERATURE
SELECTOR
0
0
-
Check the operation of the lower oven.
Set the oven selector control knob to
‘BAKE.” Set the oven temperature control
knob to “350°F.” In l-2 minutes, the
bottom element should glow red. The
upper element should become hot, but
not glow red. The lower oven indicator
light should be on and the oven should
be heating.
The oven indicator light goes off when
the oven is preheated.
Turn the oven selector and temperature
control knobs to ‘OFF.”
13
n
Check the operation of the
single or upper oven broil element. Press
the “BROIL” button. “500”” will appear in
the display. Press the ‘START/ENTER”
button to start the broil operation. In l-2
minutes, the upper element should glow
red. The single or upper oven indicator
light should be on and the oven should
be heating.
Press the “OFF/CANCEL” button.
TEMPERATURE
SELECTOR
0
0
Check the operation of the lower oven
broil element. Set the oven selector and
oven temperature control knobs to
“BROIL.” In l-2 minutes, the upper
element should glow red. The lower
oven indicator light should be on and
the oven should be heating.
Turn the oven selector and temperature
control knobs to “OFF.”
f
You have just finished
installing your new Whirlpool
oven. To get the most efficient
use from your new oven, read
your Whirlpool Use & Care Guide.
I
Congratulations!
I
and Guide close to oven for easy
~~~~~~~
Panel E