Maytag 760S Dishwasher User Manual


 
34
Setting water hardness
If you have a dishwasher with a water softener, you may need to change the setting, de-
pending on the hardness level of the water. Phone your local Water Board to check the water
hardness in your area. The dishwasher is set for low water hardness on delivery.
1. Switch off the dishwasher with the main switch.
START
STOP
2. Press the main switch while holding in the Start/Stop switch. Release the
Start/Stop button.
PROG PROG
3. Press the Program button from one to six times depending on the hardness
of the water. Program symbols will light up as you press.
START
STOP
4. Press the Start/Stop button and the setting will be stored until next time you
want to make a change.
*
˚dH
˚fH
* All program indicators extinguished: Machines without
water softeners and machines with water softeners and
low water hardness.
0-5 0-9
9-14
15-25
26-34
35-52
53-79
80+
6-8
9-14
15-19
20-29
30-44
45+
Setting water hardness
*
**
*
*