Maytag 9962 Dishwasher User Manual


 
SELECTING CYCLES & OPTIONS
Your dishwasher is designed with a system which allows To cancel a delay:
controls to interpret and adapt to vacious sit- - ..... 1 ....... computer
. Press the DELA'* Dao a_ain. Tne mmeator n_ht Will_O
nations with human-hke reasoning, It also provides you . , , _.,, " .... _" -
. , . , . . " ¢. out anti rue eyele _vnl stal_[ nlulqeolatelv.
the opportunity- to select varlons cycles ann optmns o_ "
),our choosing[The following information will help yon OPTIONS
select the appropriate cyele and options for each load• Pressing the OPTIONS pad allows you to select any of
SMART START the six additional lit pads. When selected, the pad will
lieht and a tone will sound. Options inehlde:
This utilizes sensors to develop an optimum cycle based _"
on the water temperature, soil level, detergent pres- SANI SCRUB is designed for loads with heavy or
thee, and uash--arm speed and rotation. The sensors dried-on soilss.It cheeks the water temperature of the
continuously monitor these conditions to adjust the mare _ash and final rinse to improve eleamng and dr).-
cycle and time up or dox_mas needed, lou may notice ing results. (HEATED DRY may or may not be select-
the time in the display change as the cycle is ed with this cycle.)
adjusted.
When selected, the indicator on the pad will light and a _.
Itis activated bypressing the SMART START pad. The tone sounds. "_SH, ,',',,;',_and an estimated e?cle time
indicator on the pad will light and a tone will sound, appear in the display.
WASH, ;;_'.',?,and an estimated cycle time will appear in .............. , _ , _ _ .
,-_ _ul,_ vv_a_ _sa snort cycle for use on (rusty or ve_"
the dis la_
P ' )" with this ,cle. lightly soiled items you wish to store or reuse immedi-
Yon ]nay want to select a drying option e_ ately.
The control remembers the last option selected so it is When selected, the indicator on the pad will light and a _"
imv
not necessa D-to reselect it each time unless yon want to tone sonnds. \VASH, ,'2',,,d7and an estimated evcle time
change the option. Refer to HEATED DRY on page 9 appear in the display.
for more information.
RINSE & HOLD is a cycle designed to rinse a few Car)
DELAY START soiled dishes being held until tim dishwasher is full. It _'_
This feature can postpone or interrupt any cycle from helps to minimize an)' potential food odors. A dD' cycle e_
10 minntes
to 12
hours
by pressing the DELAY pad. is not available with this cycle since the dishes are not _"
The time increases by 10 minute increments until 30 yet washed.
minutes is reached• It then increases to 60 minutes and
continues to increase in i hour increments until 12
hours is reached. ¢_
To set up a delay:
2 Rinses 11 _.
Press SMART START and/or an}'options. Then, quick-
ly, press and hold the DELAY pad until the desired Main Wash Gal. _.
amount of delay time appears in the display. 2 Rinses
Dry
NOTE: If delay is chosen Without tlr_ _se_ectfi?_a- _
cycle and/or optiorls, the &_hwa_h_the
last wash cycle used in the, del W,_,_i o_ _,_ _f:_l
The indicator on the pad lights and a tone sounds when _"
selected. DELAY and the delay time remaining appear
in the display as the time is counted down to the start
of the cycle. R_I_NSE.....& IROL"D _" '
To interrupt a cycle: rinses, . _._shes being held for Rinse 2
Press and hokl the DELAY pad until the desired a&tla0adtordducepotential OFF Gal.
amount of time is displayed. The cycle will resume food odor in the dishwasher.
when the delay time runs out or when the DELAY pad
is pressed again.
Page 7