Maytag HRV-150 Ventilation Hood User Manual


 
22
8.0
Installation of the Controls
Voltage: 12 volts DC
Dimensions: 5” x 5” x 1 3/8”
(127 mm x 127 mm x 35 mm)
INSTRUCTIONS:
1- Determine the location of the control.
The wall control must be installed in a central location on the
main floor. Typical locations for these controls are kitchen, main hallways and family room.
2- Remove the button(s) and the cover plate of the control.
3- Install the wall control 60 inches (1.5 m) from the floor and
leave a free space of at least 2 inches (5 cm) to the right of
the control to allow user to slide out the control instructions.
Use the template provided in the control box to position the
wire hole and the screw holes. Use the screws and the plastic
anchors provided in the installation kit to secure the control.
(See figure 16.)
8.1 DIMENSIONS AND SPECIFICATIONS (MAIN CONTROLS)
8.2 INSTALLATION OF THE MAIN CONTROL
(
B
ASIC AND
E
LECTRONIC
)
1
3
/
8
"
(35 mm)
5" (127 mm)
VC0016
5" (127 mm)
FRONT VIEW
SIDE VIEW
VC0026
ELECTRONIC
BASIC
CAUTION
Never install more than one main control per unit.
60" (1.5 m)
"
(
1.
5
2"
(
5 cm
)
VD0025
figure 16