Filter
Top Products
eoe_oeeeeoeeeeOeeoeIeeteOeeeeQoeeOee_eoeOeaeeOe__ee_eeeeee_eeeoeeeeeeeeeeoeeeeee_
Pots & Pans provides additional heated dry time. The Note: Use this option if the incoming wate
Pots & Pans option does NOT add heated dry time in perature is below 120°F due to other demand
Quick Wash/Rinse. as showers and laundry.
Note: Use Pots & Pans to aid in the removal of I Temp Sense OFF cancels the water temperatur
tough, difficult food soils (such as Starches and fats) I in the main wash and rinse.
and to boost drying, Heated Dry ON improves drying results by tu
, i
Pots & Pans OFF cancels the water temperature checks the heating element during the dry portion of tit
and the additional heated dry time. Heated Dry OFF turns the heating element el
Temp Sense ON ensures proper water temperature in the dry portion of the cycle. Towel drying of sol
the Normal, Light, and China/Crystal cycles. If neces- may be necessary with this selection and more 1
sary, the cycle is extended until proper water tempera- may be noticed on the dishwasher interior.
ture is reached. When either the wash or rinse portions Note: With either dry option, it is normal to
of the cycle is being extended, the HEATING DELAY vapor coming out of the _,ent area.
light is illuminated.
Operating "tips
ioe oeoe eeeoeee oe Deoeeoeoeoeee oee ooeeoeeeoDeeooeel
Starting The Dishwasher Adding a Forgotten Item
[] After loading the dishwasher and adding detergent, For best cleaning, the forgotten item should 1:
set the control knob to the desired cycle and press early in the cycle.
the appropriate option button(s). [] Unlatch the door.
Note: When the control knob is set at Normal or [] Wait for the water circulation to stop.
....... Light, Intelliclean ON should be selected. [] Open the door and add the item.
]Run the water from the hot water tap to clear the
line of cold water before starting. [] Close and latch the door.
[] Press the door until it latches. The cycle will begin [] The cycle resumes automatically.
with a drain prior to fill.
I
::: : Note: Water heating and dry options can be used separately or together. To make a selection, press the
sponding on/off button.
Indicator Lights
Delay Start illuminates when this option is selected.
Clean illuminates at the end of the dry cI
........ The light stays on until the start of the cycle, remains lit until the control knob has been r
Smart Sensor illuminates after the prerinse and pre- advanced to OFF.
wash in the IntelliClean _Mcycle option. During this _ Heating Delay illuminates to indicate that 1
time, the dishwasher will either hold or drain it's present is being extended to heat the water to the proI
: :_: water fill.
: perature. The location of the _ symbol aro
:: control knob corresponds to the heating delay
.... of the cycle.