Maytag MDB6000 Dishwasher User Manual


 
Cycles at a Glance .............................................
.... _ ms
STARTSENSORCLEANDELAy
_"IMnYrA6 J_CLEAN_SS.WAS_ERS-SUpE_CA,AC_-OUSETF_W/ _._k°ob
Your dishwasher is designed with technology that automatically determines the proper number of waterfills need
clean your dishes. Select IntelliClean '_ON when setting the control knob at Normal or Light. This automati
adjusts the number of drains and fills based on the soil level of the load. Water can be saved because there are no k
unnecessary drains and fills when the dishes are already clean! This dishwasher also still provides you with the al
to select the specific cycle and/or option of your choice.
Cycles Delay Start allows you to set the dishwasher to op,
Located around the knob on the right side of the panel, at a more convenient time or during off- peak er
rate hours. Simply turn the knob to the desired nu
of delay hours and latch the door.
IntelliClean TM Option
*Normal with InteUi- Prewash 10.4 Gal. utilizes a sensor to customize the number of wate_
Clean ON is designed *Sensor check (the needed for the cycle. This sensor interprets the soil
for washing loads con- Prerinse IntelliClean'_ and assesses the need for a drain and refill of
taining dishes with *Sensor check option may
heavy or normal tbod Main Wash decreasewater While the sensor is making this decision, there is a I
soils. Prerinse usageto aslow of approximately 4 minutes and the SMART SEN
Hi-TempRinse as6.2gal.) light is illuminated. Depending on the decision ma_
Dry the sensor, you may or may not hear a drain an
during this pause.
Light with IntelliClean Prewash 8.3 Gal. Select IutelliCleau ON when setting the control kr
ON is designed to wash *Sensor check (theIntelliClean'_ either the Normal or Light cycle.
loads containing dishes Main Wash option may
with lighter amounts of Prerinse decreasewater Normal with IntelliCleau ON has two pauses for
food soils. Hi-TempRinse usagetoas low checks, one at the end of the prewash and one at
Dry as 6.2 gal.) of the prerinse portions of the cycle.
............................................................. Light with IntelliClean ON has one pause for a
China/Crystal is Main Wash 6.2 Gal. check. This occurs at the end of the prewash port_
designed for washing Prerinse the cycle.
crystal, china or lightly Hi-Temp Rinse
soiled dishes. Dry IntelliClean OFF turns off the SMART SENSO1
............................................................. The Normal and Light cycles will function with tl_
Quick Wash/Rinse Wash 4.4 Gal. predetermined number of drains, fills and water u_,
is designed for use when Rinse
lightly soiled dishes are ] Note: The IntelliClean TM sensor in the pump n
needed in a hurry. I stay submerged, so a short fill of water is added.............................................................. the last drain in the cycle.
Rinse & Hold rinses Rinse 2.0 Gal.
dishes being held until Other Options
the dishwasher is full.
This cycle helps reduce Pots & Pans ON checks the main wash and fina
the potential for odors to temperature. If needed, the cycle is interrupted t
develop, water to the proper temperature and the HE_
................................ . ...... • • • DELAY light is illuminated.
* Manufacturer's recommended cycle choice.
8