Filter
Top Products
32
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
ERROR
(ERROR 1, 2)
message appears in
the display window.
•
ERROR 1: If door is opened
before time countdown
appears in the display.
•
ERROR 2: If the oven has
not been plugged into a
power supply for more than
5 minutes when you start
Sensor Cooking.
•
Press
STOP/CLEAR
and
restart using Timed
Cooking on page 14.
•
Press
STOP/CLEAR
and
wait for 5 minutes to
restart from step 1 of
Auto Sensor
Microwaving on
page 16.
Why couldn’t I get
good results even
though I cooked food
using Auto Sensor
Cooking?
•
The food was not covered
properly.
•
STOP/CLEAR
was pressed
or the door was opened
while the sensor was
programming the right
cooking time and power
level.
•
The food being cooked was
not suitable for Auto
Sensor Microwaving.
•
There may have been too
much or not enough food to
ensure proper results from
Auto Sensor Microwaving.
•
See pages 16 -17 and 24
- 25 for instructions on
how to prepare food.
•
Do not open the door or
press
STOP/CLEAR
while display shows
SENSOR COOKING.
•
Use Timed Cooking.
(see page 14)
•
When cooking more
than 2 lbs (900 g) or less
than 4 oz. (115 g) of
food, use Timed
Cooking on page 14.
MMC5100AD-Maint-B.fm Page 32 Thursday, March 1, 2001 2:00 PM