Filter
Top Products
Compact Refrigerators and Freezers Service and Installation Manual
For customer service, call (888) 732-2446 Fax (800) 669-0619, www.mccallrefrigeration.com
2
Receiving & Inspecting Equipment ................................................. 2
Specifications .................................................................................. 3
Installation ...................................................................................... 3
Caster Installation ........................................................................... 4
Caster/Leg Mounting Detail ............................................................ 4
Operation ........................................................................................ 5
Door Maintenance ........................................................................... 5
Defrosting ....................................................................................... 5
Door Hinge Reversal Instructions ................................................... 6
Door Hinge Reversal Templates ...................................................... 7
Maintenance .................................................................................8-9
Wiring Diagrams ........................................................................... 10
Replacement Parts Lists ..........................................................11-12
Standard Labor Guidelines ............................................................ 13
Manufacturers Limited Warranty .................................................. 14
Standard Warranties ..................................................................... 15
The serial number is located on either the right side interior back
wall or under the top nosing directly above the right door.
Always have the serial number of your unit available when calling
for parts or service. A complete list of authorized McCall parts
depots is on www.mccallrefrigeration.com.
This manual covers standard units only. If you have a custom
unit, consult the customer service department at 1-888-732-
2446
©2010 McCall. All rights reserved. Reproduction without written permission
is prohibited.
Even though most equipment is shipped crated, care should
be taken during unloading so the equipment is not damaged
while being moved into the building.
1. Visually inspect the exterior of the package and skid or
container. Any damage should be noted and reported to
the delivering carrier immediately.
2. If damaged, open and inspect the contents with the
carrier.
3. In the event that the exterior is not damaged, yet upon
opening, there is concealed damage to the equipment
notify the carrier. Notification should be made verbally
as well as in written form.
4. Request an inspection by the shipping company of the
damaged equipment. This should be done within 10 days
from receipt of the equipment.
5. Check the lower portion of the unit to be sure legs or
casters are not bent.
6. Be sure to check the compressor compartment housing
and visually inspect the refrigeration package. Be sure
lines are secure and base is still intact.
7. Freight carriers can supply the necessary damage forms
upon request.
8. Retain all crating material until an inspection has been
made or waived.
Receiving And Inspecting The Equipment
Contents
Serial Number Location