Filter
Top Products
DESCALING
The lime content of ordinary tap water means
limescale may be deposited inside the kettle. This
limescale may be loosened using acetic acid
(NOT ordinary vinegar) or descaler, available in
supermarkets, etc.
1. Mix 100 ml acetic acid with 300 ml cold
water, or follow the instructions on the
descaler packaging.
2. Pour the solution into the kettle and switch it
on.
3. Allow the solution to boil twice and then pour
it out.
4. To remove the final residues of limescale and
acetic acid, pour cold water into the kettle
again (up to the maximum mark) and switch
it on.
5. Pour the water out once it has boiled.
6. Repeat the process described under points
4-5 three times.
The kettle is now ready for use again.
ENVIRONMENTAL TIPS
Once any electrical product is no longer
functional, it should be disposed of in such a way
as to cause minimum environmental impact, in
accordance with the regulations of your local
authority. In most cases you can take such
products to your local recycling station.
GUARANTEE TERMS
The guarantee does not apply:
• if the above instructions are not followed
• if the appliance has been interfered with
• if the appliance has been mishandled,
subjected to rough treatment, or has suffered
any other form of damage
• if faults have arisen as a result of faults in
your electricity supply.
Due to the constant development of our products
in terms of function and design, we reserve the
right to make changes to the product without
prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing
errors.
16
245031_IM 18/04/05 15:00 Side 16