5
Your product may vary slightly from illustration.
Parts Identification
Water Chamber Lid
Water Chamber
with Water Level
Indicator
Filter Basket
Holder
Flow
Nozzle
(P/N 31130)
Filter
Basket
(P/N 31131)
Base
Thermal Mug
Lids
(P/N 30909)
Drip Tray
(P/N 31064)
Overflow
Tray
(P/N 31065)
Power Switch with
Indicator Light
Thermal
Mugs
(P/N
30911CHR)
FIGURE A
FIGURE D
FIGURE C
FIGURE B
4
SHORT CORD INSTRUCTIONS: A short power supply cord is
provided to reduce the risk resulting from becoming entangled
in or tripping over a longer cord.
Do not use an extension cord with this product.
POLARIZED PLUG: This appliance has a polarized plug, (one
blade is wider than the other). To reduce the risk of electric
shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt
to modify the plug in any way.
PLASTICIZER WARNING:
CAUTION: To prevent Plasticizers from migrating from the finish
of the countertop or tabletop or other furniture, place NON-
PLASTIC coasters or placemats between the appliance and the
finish of the countertop or tabletop.
Failure to do so may cause the finish to darken, permanent
blemishes may occur or stains can appear.
ELECTRIC POWER: If the electric circuit is overloaded with
other appliances, your appliance may not operate properly. It
should be operated on a separate electrical circuit from other
appliances.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT REMOVE THE BOTTOM COVER. NO USER-
SERVICEABLE PARTS INSIDE. REPAIR SHOULD BE DONE BY
AUTHORIZED SERVICE PERSONNEL ONLY.
Before Using Your
Take 2
™
Coffee Maker
Before using your Take 2™ Coffee Maker for the first time, we
suggest you become familiar with all of its parts. Read all
instructions and cautions carefully.
CAUTION: Press the Power Switch with Indicator Light so
that the light is off. Unplug from outlet.
IMPORTANT: Never place Thermal Mugs on a hot stove or in
a microwave. Never let Thermal Mugs stand in water.
Before brewing coffee, follow instructions for cleaning. See “Care
and Cleaning,” page 7.
CAUTION: Do not immerse cord, plug, or coffee maker unit
in water or other liquids.